Buscar

[andremorgan]

How Do You Clean The Shark NV360 Vacuum: Step-by-step Guide

Shark NV360 is one of the most impressive vacuum made by SharkNinja company. However, like other vacuums, you have to clean the device regularly to make sure it durable and works for a long time.

To help you have a sparkling machine, the article below will provide a step-by-step guide to clean it accurately and efficiently.

How Often Should You Clean A Shark NV360?

Following the manufacturer's advice and Shark Navigator NV360 reviews, you should clean the Shark NV360 every three months. The HEPA filter can work longer, around two years, but when you notice the machine less effective, it is better to have it washed.

Some signals indicate your vacuum needs to be cleaned, that includes:

• Instead of sucking up dirt and dust, the vacuum leaves them behind
• Gasp-like sounds are coming from the vacuum
• Annoyed odor appeared
• Less powerful suction machine

Ideally, buyers are suggested washing your vacuum more or less four times a year, depending on the using frequency.



How To Clean A Shark NV360 Vacuum Cleaner?

Required Items

Before cleaning the shark vacuum nv360, you will need a little stuff as below:

• Soft brush
• Gloves for hands' protecting
• Microfiber cloth
• Soap
• Water connected with a sink or basin

Step-by-step Guide To Clean The Shark NV360 Vacuum

#1 Unplug And Disassemble

Of course, the first step is to unplug and disassemble the device.

Remember to clean it outdoors because there might be a lot of dirt and dust. Put a sheet, large papers, or similar covers under your vacuum to avoid a messy heap.

Useful Reference:

TheKingLive

Shark NV360 versus Shark NV352 - which one suits you better

#2 Empty Dust Cup

Secondly, you should empty the dust cup. Because that is the dirtiest space, keep in mind to clean it after you vacuum and periodically during cleaning.

Remove the dust cup from the shark vacuum by using latches. Then, pouring the dust into a disposal bag. Taking the soap, water, and microfiber cloth to clean the cup. Wash it again in cold water and let it dry in about 24 hours.

#3 Clean Filters

There is a foam and felt filter attached with the Shark vacuum so keep in mind to make both of them get rid of dirt.

Put the filters into warm soapy water. Wash them carefully by hand. Do not use a washing machine or dishwasher if you do not want to decay them.

After that, let them dry for at least 24 hours also.



#4 Reassemble The Vacuum

After cleaning the dust cup and clean filters, you can soak other components such as the pet power brush, or hose if possible. After all, do not forget to reassemble the vacuum after checking every part is dry. If not, you will let mold grow in your vacuum easily.

Lastly, spread a fresh scent if needed to make your vacuum and your home fragrant.

Final Words

In conclusion, above are some Shark NV360 Reviews about how to clean any shark navigator lift away deluxe nv360. Hopefully, you find this article helpful for washing the machine and improving its efficiency.